Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Sanitary Silicone Tubing, 3/8 in ID, 5/8 in OD
Sanitary platinum-cured silicone tubing designed for food, beverage, and sensitive fluid transfer applications. The ultra-smooth inner bore reduces particle entrapment, lowers extractables, and facilitates thorough cleaning and sanitization. Supplied in 50 ft coils and sized for precise transfer in laboratory and process settings.
- Material: platinum-cured silicone
- Inner diameter: 3/8 in (9.53 mm)
- Outer diameter: 5/8 in (15.88 mm)
- Wall thickness: 1/8 in (3.18 mm)
- Length: 50 ft per coil
- Certifications: USP Class VI, FDA, NSF 51, 3A sanitary standard
- Temperature range: -112 °F to 400 °F (-80 °C to 204 °C)
- Durometer: 50 Shore A
- Key feature: ultra-smooth inner bore to minimize particle entrapment and ease sanitization
Med Vet International Examination Sheath Atraumatic Tip 9 FR 3mm, J1635D1, Each
Examination Sheath Atraumatic Tip Working Channel 1mm
McMaster-Carr Firm Polyethylene Tubing for Drinking Water
Firm Polyethylene Tubing for Drinking Water Semi-Clear White, 1/4" ID, 3/8" OD
Med Vet International Cancellous Screw, J0419LC, 3mm x 28mm, Each
2mm pilot. 2.5 hex head. Self-tapping. Single pack.
Med Vet International Steel Stainless K-Wire, J0250N, 0.045in x 7in, 6 Count
K-Wire or Fine Orthopedic Wire. Highest quality stainless steel type 316LVM. U.S.A. made. Double Trocar Point.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 5/16""ID"" ID x 7/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
McMaster-Carr Hard Nylon Plastic Tubing for Air and Water
Hard Nylon Plastic Tubing for Air and WaterOpaque Black, 3/32" ID, 1/8" OD
McMaster-Carr ABRASION-RESISTANT POLY TUBING
Abrasion-Resistant Polyurethane Tubingfor Fuels, 1/4" ID, 1/2" OD
Microsolv Technology Corporation Tubing, PTFE, 0.007" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 0.007" ( 0.18mm ) Pressure rating: 850 psi.